Specifications

3-593

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) snmp-server notify inform

To configure the SNMP notify inform request on a WAAS device, use the snmp-server notify inform

global configuration command. To return the setting to the default value, use the no form of this

command.

snmp-server notify inform

no snmp-server notify inform

Syntax Description This command has no arguments or keywords.

Defaults If you do not enter the snmp-server notify inform command, the default is an SNMP trap request.

Command Modes global configuration

Device Modes application-accelerator

central-manager

Examples The following example shows how to configure an SNMP notify inform request versus the default SNMP

trap:

WAE(config)# snmp-server notify inform

Related Commands (config) snmp-server community

(config) snmp-server contact

(config) snmp-server enable traps

(config) snmp-server group

(config) snmp-server host

(config) snmp-server location

(config) snmp-server mib

(config) snmp-server user

(config) snmp-server view

snmp trigger