Specifications

3-590
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) snmp-server location
(config) snmp-server location
To set the SNMP system location string on a WAAS device, use the snmp-server location global
configuration command. To remove the location string, use the no form of this command.
snmp-server location line
no snmp-server location line
Syntax Description
Defaults No system location string is set.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines The system location string is the value stored in the MIB-II system group system location object. You
can see the system location string with the show snmp EXEC command.
Examples The following example shows how configure a system location string:
WAE(config)# snmp-server location Building 3/Room 214
Related Commands (config) snmp-server community
(config) snmp-server contact
(config) snmp-server enable traps
(config) snmp-server group
(config) snmp-server host
(config) snmp-server mib
(config) snmp-server notify inform
(config) snmp-server user
(config) snmp-server view
snmp trigger
location line Specifies text for MIB-II object sysLocation. This string describes the
physical location of this node.