Specifications

3-582
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) snmp-server contact
(config) snmp-server contact
To set the system server contact string on a WAAS device, use the snmp-server contact global
configuration command. To remove the system contact information, use the no form of this command.
snmp-server contact line
no snmp-server contact line
Syntax Description
Command Modes global configuration
Device Modes application-accelerator
central-manager
Defaults No system contact string is set.
Usage Guidelines The system contact string is the value stored in the MIB-II system group sysContact object.
Examples The following example shows how to set a system contact string and then remove it:
WAE(config)# snmp-server contact Dial System Operator at beeper # 27345
WAE(config)#
no snmp-server contact
Related Commands (config) snmp-server community
(config) snmp-server enable traps
(config) snmp-server group
(config) snmp-server host
(config) snmp-server location
(config) snmp-server mib
(config) snmp-server notify inform
(config) snmp-server user
(config) snmp-server view
snmp trigger
contact line Specifies the text for MIB-II object sysContact. This is the identification of
the contact person for this managed node.