Specifications

3-552
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) policy-engine application map adaptor EPM
Command Modes global configuration
Device Modes application-accelerator
Usage Guidelines
Note We strongly recommend that you use the WAAS Central Manager GUI to centrally configure
application policies for your WAEs. For more information, see the Cisco Wide Area Application
Services Configuration Guide.
Related Commands (config) policy-engine application classifier
(config) policy-engine application map adaptor WAFS transport
(config) policy-engine application map basic
(config) policy-engine application map other optimize DRE
(config) policy-engine application map other optimize full
(config) policy-engine application name
(config) policy-engine application set-dscp
LZ Applies LZ compression.
none Applies no compression.
full Applies full generic optimization.
pass-through Allows traffic to pass through without any optimization.
accelerate (Optional) Accelerates the traffic using a special adapter.
cifs Accelerates the traffic using the CIFS accelerator.
http Accelerates the traffic using the HTTP accelerator.
mapi Accelerates the traffic using the MAPI accelerator.
MS-port-mapper Accelerates the traffic using the Microsoft EndPoint Port Mapper
(EPM).
nfs Accelerates the traffic using the NFS accelerator.
video Accelerates the traffic using the video accelerator.
set-dscp dscp-marking (Optional) Sets the DSCP marking value (Table 3-2) to be applied to the
traffic classified in the policy. Applies only if the action includes the
optimize or accelerate keywords.
list Lists the specified application policy maps.
from line-number (Optional) Specifies the line number of the first application policy map
to list.
to line-number (Optional) Specifies the line number of the last application policy map
to list.
move Moves the specified application policy map from one line to another.