Specifications

3-545
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) logging host
Usage Guidelines Use the logging command to set specific parameters of the system log file.
To configure the WAAS device to send varying levels of event messages to an external syslog host, use
the logging host option.
You can configure a WAAS device to send varying levels of messages to up to four remote syslog hosts
using the logging host hostname command.
Examples The following example shows how to send messages that have a priority code of “error” (level 3) to the
remote syslog host that has an IP address of 172.31.2.160:
WAE(config)# logging host 172.31.2.160 priority error
Related Commands clear arp-cache
show logging