Specifications

3-514

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) inline vlan-id-connection-check

To enable VLAN ID checking on intercepted traffic, use the inline vlan-id-connection-check global

configuration command. To disable VLAN ID checking, use the no form of this command.

inline vlan-id-connection-check

no inline vlan-id-connection-check

Syntax Description This command has no arguments or keywords.

Defaults VLAN ID checking is enabled.

Command Modes global configuration

Device Modes application-accelerator

central-manager

Examples The following example shows how to enable VLAN ID checking of the intercepted traffic on the WAAS

device:

WAE(config)# inline vlan-id-connection-check

The following example shows how to disable VLAN ID checking:

WAE(config)# no inline vlan-id-connection-check

Related Commands (config) interface GigabitEthernet

(config-if) encapsulation dot1Q