Specifications

3-502

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) disk object-cache extend

To enable extended object cache, use the disk object-cache global configuration command. To disable

this feature, use the no form of this command.

disk object-cache extend

no disk object-cache extend

Syntax Description This command has no arguments or keywords.

Command Default No default behavior or values.

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines When extended object cache is enabled, the object cache space is increased only after saving the

configuration and performing a reload.

Note If you have a virtual blade enabled using vbspace of greater than 30-GB, you must stop the virtual blade

and remove the configuration before enabling extended object cache. If the virtual blade usage is less

than 30-GB (including saved memory state) vbspace content will be preserved, otherwise vbspace

content will be erased. In either case, after enabling extended object cache, the vbspace filesystem will

be reduced to 30-GB if virtual blade is enabled.

The status of extended object cache can be displayed using the show disk details EXEC mode command.

The output of this command states whether extended object cache is enabled or disabled.

This feature is only supported on 674-4G and 674-8G models.

Examples The following example shows how to enable extended object cache using the disk object-cache extend

command on a 674-4GB model:

WAE(config)# disk object-cache extend

Cumulative disk space for all VBs will be reduced to 30GB.

Are you sure want to enable [yes/no]?

Related Commands (config) disk logical shutdown