Specifications

3-501

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

(config) disk logical shutdown

To shut down the RAID-5 logical disk drive, use the disk logical shutdown global configuration

command. To reenable the RAID-5 logical disk drive, use the no form of this command.

disk logical shutdown

no disk logical shutdown [force]

Syntax Description

Defaults The RAID-5 array is configured by default.

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines This command is supported on WAE-7341, WAE-7371, and WAE-674 models only.

Use this command to operate the WAE in diskless mode. In diskless mode, the partitions and disks are

not mounted and cannot be used.

You must reload the device for this command to take effect.

After a multiple disk failure or RAID controller failure, and after the drives are replaced and the RAID

disk is rebuilt, the logical disk may remain in the error state. To reenable the disk, use the no disk logical

shutdown force command, then reload the WAE.

Examples The following example shows how shutdown the RAID-5 logical disk drive using the disk logical

shutdown command:

WAE(config)# disk logical shutdown

Related Commands (config) disk disk-name

force (Optional) Forces RAID Logical drive to be reenabled when used with the

no form of this command.