Specifications

3-475
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) auto-register
To assign a static IP address using the interface GigabitEthernet slot/port command, you must first
disable the automatic registration of devices through DHCP by using the no auto-register enable
command.
Examples The following example shows how to enable autoregistration on GigabitEthernet port 2/0:
WAE(config)# auto-register enable GigabitEthernet 2/0
The following example shows how to disable autoregistration on all configured interfaces on the WAE:
WAE(config)# no auto-register enable
Related Commands show auto-register
show running-config
show startup-config