Specifications

3-465
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) authentication fail-over
Examples The following example shows how to query the secondary authentication database if the primary
authentication server is unreachable. This feature is referred to as the failover server-unreachable
feature.
WAE(config)# authentication fail-over server-unreachable
If you enable the failover server-unreachable feature on the WAAS device, only two login authentication
schemes (a primary and secondary scheme) can be configured on the WAAS device. The WAAS device
fails over from the primary authentication scheme to the secondary authentication scheme only if the
specified authentication server is unreachable.
Note If you enable the failover server unreachable feature on the WAAS device, make sure that you
specify either TACACS+ or RADIUS as the primary scheme for authentication, and specify
local as the secondary scheme for authentication.
Related Commands (config) radius-server
show authentication
show statistics radius
show statistics tacacs
(config) tacacs
windows-domain
(config) windows-domain