Manualshelf

Specifications

ManualsBrandsCisco ManualsComputer equipmentWAE-7326-K9
491492493494495496497498499500
3-439
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
(config) accelerator cifs preposition
(config) accelerator cifs preposition
To configure a CIFS application accelerator preposition directive, use the accelerator cifs preposition
global configuration command. To disable the application accelerator, use the no form of this command.
accelerator cifs preposition [remove] directive_id
no accelerator cifs preposition [remove] directive_id
Syntax Description
Defaults No default behavior or values.
Command Modes global configuration
Device Modes application-accelerator
Usage Guidelines Use the accelerator cifs preposition command to create and edit preposition directives to be used with
the transparent CIFS accelerator. A preposition directive defines a set of files that are to be prepositioned
about the WAE device.
The accelerator cifs preposition command invokes the preposition configuration submode. For details
on the commands available in this submode to configure a preposition directive, see the “Preposition
Configuration Mode Commands” section.
Note We recommend that you use the WAAS Central Manager GUI to configure preposition directives. For
more information, see the “Creating a Preposition Directive” section in the Cisco Wide Area Application
Services Configuration Guide.
Note If you create a preposition directive from the CLI before the secure store on the WAE is initialized, you
must wait at least two datafeed poll cycles (10 minutes by default) before initializing the secure store;
otherwise, the preposition directive will not propagate to the Central Manager because the credentials
will not be able to be decrypted on the WAE.
Examples The following example shows how to create a new CIFS preposition directive with ID 3:
WAE(config)# accelerator cifs preposition 3
WAE(config-preposition)
remove (Optional) Deletes a preposition directive.
directive_id ID of an existing preposition directive that you want to change or delete, or
a new directive that you want to create.