Specifications

2-7
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 2 Cisco WAAS Software Command Summary
(config) disk encrypt Enables disk encryption. global configuration application-
accelerator
(config) disk error-handling Configures how the disk errors should be
handled.
global configuration All
(config) disk logical
shutdown
Shuts down the RAID-5 logical disk drive. global configuration All
(config) disk object-cache
extend
Enables extended object cache, . global configuration All
dnslookup Resolves a DNS hostname. user-level EXEC and
privileged-level EXEC
All
(config-preposition) dscp Setshe DSCP marking value for a preposition
task.
preposition
configuration
application-
accelerator
(config-preposition)
duration
Sets the maximum duration for a preposition
task.
preposition
configuration
application-
accelerator
(config) egress-method Configures the egress method for intercepted
connections.
global configuration application-
accelerator
enable* Accesses the privileged EXEC commands. user-level EXEC All
(config-preposition) enable Enables or disables a preposition directive. preposition
configuration
application-
accelerator
(config-if) encapsulation
dot1Q
Sets the VLAN ID of traffic leaving the Cisco
WAE Inline Network Adapter interface.
interface configuration application-
accelerator
(config) end Exits configuration and privileged EXEC
modes.
global configuration All
(config) exec-timeout Configures the length of time that an inactive
Telnet or SSH session remains open.
global configuration All
exit Exits from privileged EXEC mode. privileged-level EXEC All
(config) exit Exits from global configuration mode. global configuration All
(config-if) exit Exits from interface configuration mode. interface configuration All
(config-std-nacl) exit Exits from standard ACL configuration mode. standard ACL
configuration
All
(config-ext-nacl) exit Exits from extended ACL configuration
mode.
extended ACL
configuration
All
(config-if) failover timeout Configures the maximum time for the inline
interface to transition traffic to another port
after a failure event.
interface configuration All
find-pattern Searches for a particular pattern in a file. privileged-level EXEC All
(config) flow monitor Configures network traffic flow monitoring. global configuration application-
accelerator
(config-if) full-duplex Sets the current interface to the
full-duplex mode.
interface configuration All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode