Specifications

3-397

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

show windows-domain

To display Windows domain configuration information for a WAAS device, use the show

windows-domain EXEC command.

show windows-domain

Syntax Description This command has no arguments or keywords.

Defaults No default behavior or values.

Command Modes EXEC

Device Modes application-accelerator

central-manager

Examples Table 3-129 describes the fields shown in the show windows-domain command display.

Table 3-129 Field Descriptions for the show windows-domain Command

Field Description

Console/Telnet Session:

Status of the primary login authentication method for the

session: enabled or disabled.

Configuration Authentication for

Console/Telnet Session: enabled

(secondary)

Status of the secondary login authentication method for the

session:enabled or disabled.

Windows domain Configuration: Shows the Windows domain configuration settings.

Workgroup Workgroup identification string.

Comment Comment line.

Net BIOS Windows NetBIOS name for the WAE.

Realm Kerberos Realm (similar to the Windows domain name, except

for Kerberos).

WINS Server IP address of the WINS server.

Password Server Kerberos server DNS name.

Security Type of authentication configured, either “Domain” for NTLM

or “ADS” for Kerberos.

Administrative groups