Specifications

3-387
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show version
show version
To display version information about the WAAS software that is running on the WAAS device, use the
show version EXEC command.
show version [last | pending]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples Table 3-125 describes the fields shown in the show version command display.
last (Optional) Displays the version information for the last saved image.
pending (Optional) Displays the version information for the pending upgraded image.
Table 3-125 Field Descriptions for the show version Command
Field Description
Cisco Wide Area Application
Services Software (WAAS)
Copyright (c) year by Cisco Systems,
Inc.
Cisco Wide Area Application
Services Software
(WAAS-UNIVERSAL-K9) Release
XXX (build bXXX month day year)
Software application, copyright, release, and build information.
Displays WAAS-UNIVERSAL-K9 for the full software image
or WAAS-ACCELERATOR-K9 for the accelerator only
software image.
Version Version number of the software that is running on the device.
Compiled hour:minute:second month
day year by cnbuild
Comple information for the software build.
System was restarted on day of week
month day hour:minute:second year
Date and time that the system was last restarted.
The system has been up for X hours,
X minutes, X seconds
Length of time the system has been running since the last
reboot.