Specifications

3-380
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show telnet
show telnet
To display Telnet services configuration for a WAAS device, use the show telnet EXEC command.
show telnet
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples The following is sample output from the show telnet command. It shows whether or not Telnet is enabled
on the WAAS device.
WAE# show telnet
telnet service is enabled
Related Commands telnet
(config) telnet enable
(config) exec-timeout