Specifications

CHAPTER

2-1

Cisco Wide Area Application Services Command Reference

OL-21611-01

Cisco WAAS Software Command Summary

This chapter summarizes the Cisco WAAS 4.1.1 software commands.

Table 2-1 lists the WAAS commands (alphabetically) and indicates the command mode for each

command. The commands used to access configuration modes are marked with an asterisk. Commands that

do not indicate a particular mode are EXEC mode commands. The same command may have different

effects when entered in a different command mode, so they are listed and documented separately. (See

Chapter 1, “Using the WAAS Command-Line Interface” for a discussion about using CLI command

modes.)

In Table 2-1, in the Device Mode column “All” indicates that the particular CLI command is supported

in both central-manager mode and application-accelerator mode.

Table 2-1 Command Summary

Command Description CLI Mode Device Mode

(config) aaa accounting Configures AAA accounting. global configuration All

(config) aaa authorization

commands

Configures AAA authorization. global configuration All

(config) accelerator cifs Enables the CIFS application accelerator. global configuration application-

accelerator

(config) accelerator cifs

preposition

Configures a CIFS application accelerator

preposition directive.

global configuration application-

accelerator

(config) accelerator epm Enables the EPM application accelerator. global configuration application-

accelerator

(config) accelerator http Enables the HTTP application accelerator. global configuration application-

accelerator

(config) accelerator mapi Enables the MAPI application accelerator. global configuration application-

accelerator

(config) accelerator nfs Enables the NFS application accelerator. global configuration application-

accelerator

(config) accelerator ssl Enables the SSL application accelerator. global configuration application-

accelerator

(config) accelerator video Enables the video application accelerator. global configuration application-