Specifications

3-343
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics peer
show statistics peer
To display peer Data Redundancy Elimination (DRE) statistics for a WAE, use the show statistics peer
EXEC command.
show statistics peer
show statistics peer dre [context context-value | peer-id peer-id | peer-ip ip-address | peer-no
peer-no]
show statistics peer dre detail [context context-value | peer-id peer-id | peer-ip ip-address |
peer-no peer-no]]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Examples Table 3-108 describes the fields shown in the show statistics peer dre command display. This command
shows the peer DRE device connection information.
context context-value Displays peer statistics for the specified context (0–4294967295).
peer-id peer-id (Optional) Specifies the MAC address of the peer (0–4294967295).
peer-ip ip_address (Optional) Specifies the IP address of the peer.
peer-no peer-no (Optional) Specifies the peer number.
Table 3-108 Field Descriptions for the show statistics peer dre Command
Field Description
Peer-No Number assigned to the peer compression device.
Context Context ID for the DRE debugging trace.
Peer-ID MAC address of the peer device.
Hostname Hostname of the peer device.
Cache DRE cache data statistics as shown by the peer.
Used disk: Number of megabytes (MB) used on the disk for the DRE
cache.
Age: Time that the DRE data has been in the cache in days (d),
hours (h), minutes (m), and seconds (s).
Connections:
Total (cumulative): Number of cumulative connections that have been processed.