Specifications

3-341
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics pass-through
show statistics pass-through
To display pass-through traffic statistics for a WAAS device, use the show statistics pass-through
EXEC command.
show statistics pass-through
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Examples Table 3-107 describes the fields shown in the show statistics pass-through command display.
Table 3-107 Field Descriptions for the show statistics pass-through Command
Field Description
Outbound
PT Client: Bytes Number of bytes passed through in the client to server direction.
PT Client: Packets Number of packets passed through in the client to server direction.
PT Server: Bytes Number of bytes passed through in the server to client direction.
PT Server: Packets Number of packets passed through in the server to client direction.
PT
In Progress: Bytes Number of bytes passed through in progress.
PT
In Progress: Packets Number of packets passed through in progress.
Active/Completed
Overall Total number of connections passed through.
No Peer Number of connections passed through because a remote peer WAE was not
found.
Rjct Capabilities Number of connections passed through due to capability mismatch.
Rjct Resources Number of connections passed through due to unavailability of resources.
Rjct No License Number of connections passed through due to no license.
App Config Number of connections passed through due to policy configuration.
Global Config Number of connections passed through due to optimization being disabled
globally.
Asymmetric Number of connections passed through due to asymmetric routing in the
network (could be an interception problem).