Specifications

3-334
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics generic-gre
show statistics generic-gre
To view the GRE tunnel statistics for each intercepting router, use the show statistics generic-gre EXEC
command.
show statistics generic-gre
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines Use the clear statistics generic-gre EXEC command to clear the generic GRE statistics.
Examples Table 3-103 describes the fields shown in the show statistics generic-gre command display.
Related Commands clear arp-cache
show egress-methods
(config) egress-method
Table 3-103 Field Descriptions for the show statistics generic-gre Command
Field Description
Tunnel Destination IP address of the GRE tunnel destination.
Tunnel Peer Status Tunnel peer status. When the egress method is not generic GRE, N/A is
shown.
Tunnel Reference Count Number of connections using the tunnel.
Packets dropped due to
failed encapsulation
Number of generic GRE packets dropped due to failed encapsulation.
Packets dropped due to no
route found
Number of generic GRE packets dropped due to no route found.
Packets sent Number of generic GRE packets sent.
Packets sent to tunnel
interface that is down
Number of generic GRE packets sent to a tunnel interface that is down.
Packets fragmented Number of outgoing generic GRE packets fragmented.