Specifications

3-328
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics filtering
show statistics filtering
To display statistics about the incoming and outgoing TFO flows that the WAE currently has, use the
show statistics filtering EXEC command.
show statistics filtering
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines The show statistics filtering command displays statistics about the TCP flows that the WAE is handling.
Examples Table 3-100 describes the fields shown in the show statistics filtering command display.
Table 3-100 Field Descriptions for the show statistics filtering Command
Field Description
Number of filtering tuples Number of filtering tuple structures.
Number of filtering tuple collisions Number of times creation of duplicate filtering tuples was
detected and avoided.
Packets dropped due to filtering tuple
collisions
Number of packet drops resulting from duplicate filtering
tuple detection. Not all duplicate tuple detection results in
packet drops.
Number of transparent packets locally
delivered
Number of incoming packets delivered to an application on
the WAE that is optimizing the connection transparently.
Number of transparent packets dropped Number of incoming transparent packets dropped.
Packets dropped due to ttl expiry Number of incoming packets dropped because their TTL had
reached 0.
Packets dropped due to bad route Number of outgoing packets dropped because route lookup
failed.
Syn packets dropped with our own id in
the options
Syn packets output by the auto-discovery module that looped
back to the WAE and were dropped.
Internal client syn packets dropped Number of syn packets generated by a process on the WAE
that were dropped.