Specifications

3-309
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics connection conn-id
show statistics connection conn-id
To display connection ID statistics for a WAAS device, use the show statistics connection conn-id
EXEC command.
show statistics connection conn-id connection_id
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines The show statistics connection conn-id command displays the statistics for individual TCP
connections. This information is updated in real time.
Examples Table 3-87 describes the fields shown in the show statistics connection conn-id command display.
conn-id connection_id (Optional) Displays connection statistics for the connection with the
specified identifier number.
Table 3-92 Field Descriptions for the show statistics connection conn-id Command
Field Description
Connection Information
Peer ID MAC address of the peer device.
Connection Type Type of connection established with the peer.
Start Time Date and time connection started.
Source IP Address IP address of the connection source.
Source Port Number Port number of the connection source.
Destination IP Address IP address of the connection destination.
Destination Port Number Port number of the connection destination.
Application Name Name of the application traffic on the connection.
Classifier Name Name of the application classifier on the connection.
Map Name Name of the policy engine application map.
Directed Mode State of directed mode: true (on) or false (off).
Preposition Flow Flow was originated by an accelerator to acquire data in
anticipation of its future use: true or false.