Specifications

3-302
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics connection
App Dyn Mtch Optimized The connection has been forced through an application dynamic match
to be optimized, even though the connection may be handled as
pass-through.
PT AD Int Error The connection encountered an internal error during processing by the
TFO auto discovery SYN cache.
PT App Cfg The policy action for this application is configured as pass-through.
PT App Override The connection is pass-through because the internal application has
explicitly requested that the connection not be optimized. This state
would only occur if the connection would have otherwise been
optimized.
PT Asym Client The connection is pass-through due to the WAE only seeing one side of
the TCP connection (where the src is the client and the dst is the server).
PT Asym Server The connection is pass-through due to the WAE only seeing one side of
the TCP connection (where the dst is the client and the src is the server).
PT Dst Cfg The policy action for this application is configured as pass-through in
the peer WAE.
PT FB Int Error The connection encountered an internal error during processing by the
filter bypass module.
PT_Glb Cfg The global action is configured as pass-through; that is, TFO, DRE, or
LZ are disabled globally on the WAE.
PT In Progress The connection was already established when the first packet was seen
by the WAE.
PT Interception ACL The connection is pass-through due to an interception ACL denying
optimization.
PT Intermediate The connection is pass-through due to the WAE being in the middle of
the best local and remote WAE’s (relative to the client and server).
PT No Peer The connection is pass-through due to no peer WAE being found during
TFO auto-discovery.
PT Non-Optimizing Peer The connection is pass-through because the only peer found is a serially
clustered peer and optimization is disabled to the peer.
PT Overload The TFO application has indicated it is overloaded (that is, the
maximum number of optimized connections has been exceeded). New
connections not handled by an application accelerator are configured as
pass-through.
PT PE Int Error The connection encountered an internal error during processing by the
policy engine.
PT Rjct Capabilities The connection is pass-through due to auto discovery finding that the
peer WAE does not have the required capabilities.
PT Rjct Resources The connection is pass-through due to auto discovery finding that the
peer WAE does not have the required resources.
PT Server Blacklist The connection is pass-through because the server is on the TFO
blacklist as not supporting TCP Option (0x21) being present in the SYN
packet.
Table 3-89 Connection Types
ConnType Description