Specifications

3-296
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics auto-discovery
Socket
Allocation failures Number of socket allocations that failed.
Accept pair allocation
failures
Number of socket pair allocations that failed.
Unix allocation failures Number of Unix socket allocations that failed.
Connect lookup failures Number of socket connection lookups that failed.
Packets
Memory allocation failures Number of packet memory allocations that failed.
Total Sent Total number of auto-discovery packets sent.
Total Received Total number of auto-discovery packets received.
Incorrect length or
checksum received
Number of packets received with an incorrect length or checksum.
Invalid filtering tuple
received
Number of packets received with an incorrect filtering tuple.
Received for dead
connection
Number of packets received for invalid connections.
Ack dropped in synack
received state
Number of acknowledgement packets dropped that were in the
synchronize acknowledgement state.
Non Syn dropped in nostate
state
Number on non-SYN packets dropped that were in the nostate state.
Syn-ack packets to int. client
dropped
Number of synack packets dropped when being sent to internal
client.
Packets dropped state
already exists
Number of packets for which the dropped state already exists.
Auto discovery failure
No peer or asymmetric route Auto-discovery failed because no peer was found, or asymmetric
routing configuration was indicated.
Insufficient option space Auto-discovery failed because there was not enough space to add
options.
Invalid option content Auto-discovery failed because the content of an option was invalid.
Invalid connection state Auto-discovery failed because the connection state was invalid.
Missing Ack conf Auto-discovery failed because of missing auto discovery options
that were sent from the edge WAE sends to the core WAE on the ack
packet.
Intermediate device Auto-discovery failed because a device was discovered between the
WA Es.
Version mismatch Auto-discovery failed because the WAAS software versions did not
match.
Incompatible Peer AO Auto-discovery failed because the peer accelerator is not
compatible with the accelerator on this WAE.
Table 3-86 Result Value Descriptions for the show statistics auto-discovery Command
Result Description