Specifications

3-290
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics aoim
Related Commands show statistics accelerator
Rejected Connection
Counts Due To: (Total:)
• The number of all of the reject reasons that represent hits that were not
able to use the accelerator applications. Reject reasons include the
following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the number of
connections allowed within the time window)
• Minimum TFO not available
• Resource manager (minimum resources not available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for
accept
Number of connections added to the accelerator connection accept queue by
auto discovery.
Accept queue add
failures
Number of connections that could not be added to the accelerator connection
accept queue due to a failure. The failure could possibly be due to accelerator
not being present, or a queue overflow.
AO discovery
successful
For the accelerators that work in dual-ended mode, accelerator discovery (as
part of auto discovery) is performed. This counter indicates the number of
times accelerator discovery was successful.
AO discovery failure The number of times accelerator discovery failed. Possible reasons include
accelerator not being enabled or running on the peer WAE, or the license not
configured for the accelerator.
Table 3-82 Field Descriptions for the show statistics aoim Command (continued)
Field Description