Specifications

3-289
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics aoim
Session timeouts The number of times the accelerator application did not issue a keepalive to
the Policy Engine in a timely manner. A session refers to the particular
registration of the accelerator application within the Policy Engine.
Total timeouts The total number of times the accelerator application did not issue a
keepalive to the Policy Engine in a timely manner. This may encompass
multiple registrations.
Last keepalive received The amount of time since the last keepalive (seconds).
Last registration
occurred
The amount of time since the accelerator application registered with the
Policy Engine (seconds). Most likely causes are:
• WAE was rebooted
• Configuration change with the accelerator application enabled
• Restart of the accelerator application by the Node Manager
Hits Number of connections that had a configured policy that specified the use of
the accelerator application.
Updated Released Number of hits that were released during Auto-Discovery and did not make
use of the accelerator application.
Active Connections Number of hits that represent either active connections using the accelerator
application or connections that are still in the process of performing
Auto-Discovery.
Completed Connections Number of hits that have made use of the accelerator application and have
completed.
Drops Number of hits that attempted use of the accelerator application but were
rejected for some reason. A separate hit and drop will be tallied for each TCP
SYN packet received for a connection. This includes the original SYN and
any retries.
Table 3-82 Field Descriptions for the show statistics aoim Command (continued)
Field Description