Specifications

3-286
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Related Commands show accelerator
show statistics connection closed
Rejected Connection Counts Due To:
(Total:)
• The number of all of the reject reasons that represent
hits that were not able to use the accelerator
applications. Reject reasons include the following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the time
window)
• Minimum TFO not available
• Resource manager (minimum resources not
available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit
reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for accept Number of connections added to the accelerator
connection accept queue by auto discovery.
Accept queue add failures Number of connections that could not be added to the
accelerator connection accept queue due to a failure. The
failure could possibly be due to accelerator not being
present, or a queue overflow.
AO discovery successful For the accelerators that work in dual-ended mode,
accelerator discovery (as part of auto discovery) is
performed. This counter indicates the number of times
accelerator discovery was successful.
AO discovery failure The number of times accelerator discovery failed.
Possible reasons include accelerator not being enabled or
running on the peer WAE, or the license not configured
for the accelerator.
Table 3-81 Field Descriptions for the show statistics accelerator video detail Command
Field Description