Specifications

3-285
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Last registration occurred The amount of time since the accelerator application
registered with the Policy Engine (seconds). Most likely
causes are:
• WAE was rebooted
• Configuration change with the accelerator
application enabled
• Restart of the accelerator application by the Node
Manager
Hits Number of connections that had a configured policy that
specified the use of the accelerator application.
Updated Released Number of hits that were released during Auto-Discovery
and did not make use of the accelerator application.
Active Connections Number of hits that represent either active connections
using the accelerator application or connections that are
still in the process of performing Auto-Discovery.
Completed Connections Number of hits that have made use of the accelerator
application and have completed.
Drops Number of hits that attempted use of the video
accelerator application but were dropped by the Policy
Engine because it detected an overload condition and the
video accelerator was configured to drop unaccelerated
video traffic due to overload conditions. A separate hit
and drop will be tallied for each TCP SYN packet
received for a connection. This includes the original SYN
and any retries.
Table 3-81 Field Descriptions for the show statistics accelerator video detail Command
Field Description