Specifications
3-278
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Total Dropped Connections The number of connections that the SSL accelerator
ended prematurely. This could be due to verification
failures, revocation check failures, errors detected during
the handshake or data transfer phase of the connection, or
due to internal errors. Other counters below may shed
more light as to why connections were dropped.
Current Active Connections The number of connections currently being optimized by
the SSL accelerator.
Current Pending Connections The number of connections that have been determined to
be accelerated by the SSL accelerator, and have been
queued to be picked up by the accelerator.
Maximum Active Connections The maximum value ever reached by the Current Active
Connections counter. This counter will be reset if the
accelerator is restarted or statistics are cleared.
Total LAN Bytes Read The number of bytes read by the SSL accelerator from the
original side of the flow.
Total Reads on LAN The number of read operations performed by the SSL
accelerator on the original side of the flow.
Total LAN Bytes Written The number of bytes written by the SSL accelerator on
the original side of the flow.
Total Writes on LAN The number of write operations performed by the SSL
accelerator on the original side of the flow.
Total WAN Bytes Read The number of bytes read by the SSL accelerator from the
optimized side of the flow.
Total Reads on WAN The number of read operations performed by the SSL
accelerator on the optimized side of the flow.
Total WAN Bytes Written The number of bytes written by the SSL accelerator on
the optimized side of the flow.
Total Writes on WAN The number of write operations performed by the SSL
accelerator on the optimized side of the flow.
Total LAN Handshake Bytes Read The number of bytes read from the original side of flows
during the handshake phase of flows.
Total LAN Handshake Bytes Written The number of bytes written to the original side of flows
during the handshake phase of flows.
Total WAN Handshake Bytes Read The number of bytes read to the optimized side of flows
during the handshake phase of flows.
Total WAN Handshake Bytes Written The number of bytes written to the optimized side of
flows during the handshake phase of flows.
Total Accelerator Bytes Read An SSL accelerator internal counter. (Bytes read from
original side of DRE).
Total Accelerator reads An SSL accelerator internal counter. (Read operations
performed on original side of DRE).
Table 3-80 Field Descriptions for the show statistics accelerator ssl detail Command (continued)
Field Description