Specifications

3-272
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Current Reserved (Unused) Connections Number of current reserved but still not used
connections.
Average In-Use Connections in Last One
Hour
Average number of average in-use connections in the last
hour. This number is zero if statistics were reset/cleared
within one hour.
Average Reserved (Unused) Connections in
Last One Hour
Average number of average reserved but unused
connections in the last hour. This number is zero if
statistics were reset/cleared within one hour.
Average In-Use Connections in Last 5min Average number of average in-use connections in the last
five minutes. This number is zero if statistics were
reset/cleared within five minutes.
Average Reserved (Unused) Connections in
Last 5min
Average number of reserved (unused) connections in the
last five minutes. This number is zero if statistics were
reset/cleared within five minutes.
Configured Maximum Reserved (Unused)
Connections
Maximum reserved connections configured but not used.
Exchange Server Error Statistics This section lists the number of errors of various types
that were returned by the Exchange server.
Policy Engine Statistics
Session timeouts The number of times the accelerator application did not
issue a keepalive to the Policy Engine in a timely manner.
A session refers to the particular registration of the
accelerator application within the Policy Engine.
Total timeouts The total number of times the accelerator application did
not issue a keepalive to the Policy Engine in a timely
manner. This may encompass multiple registrations.
Last keepalive received The amount of time since the last keepalive (seconds).
Last registration occurred The amount of time since the accelerator application
registered with the Policy Engine (seconds). Most likely
causes are:
• WAE was rebooted
• Configuration change with the accelerator
application enabled
• Restart of the accelerator application by the Node
Manager
Hits Number of connections that had a configured policy that
specified the use of the accelerator application.
Updated Released Number of hits that were released during Auto-Discovery
and did not make use of the accelerator application.
Active Connections Number of hits that represent either active connections
using the accelerator application or connections that are
still in the process of performing Auto-Discovery.
Table 3-78 Field Descriptions for the show statistics accelerator mapi detail Command
Field Description