Specifications

3-264
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Total Handled Connections Connections handled since the accelerator was started or
its statistics last reset. Incremented when a connection is
accepted or reused. Never decremented.
This value will always be greater than or equal to the
Current Active Connections statistic. Includes all
connections accepted by the accelerator even if later
pushed down to generic optimization, dropped, or
handed-off to another accelerator.
Total Handled Connections = Total Optimized
Connections + Total Pushed Down Connections + Total
Dropped Connections.
Total Optimized Connections Connections previously and currently optimized by the
HTTP Accelerator. This includes: Current Active
Connections + Total Fast Connections + Fast connections
initiated by peer.
Total Connections Handed-off with
Compression Policies Unchanged
Connections initially accepted by accelerator, but later
handed off to generic optimization without policy
changes so the current negotiated policies for
compression (DRE/LZ) will be used.
Total Dropped Connections Connections dropped for any reason other than
client/server socket errors or close (for instance, out of
resources).
Current Active Connections. Number of WAN side connections currently established
and either in use or free for fast connection use.
WAN side connections currently established and in use
can be calculated as follows: Current Active Connections
- Total Active Connections Free For Fast Connection Use
Not cleared using clear statistics accelerator [http | all]
command.
Current Pending Connections Number of SYN requests queued waiting for for
accelerator to accept.
Maximum Active Connections Highest number of active connections since accelerator
was last started/restarted. Not cleared using the clear
statistics accelerator [http | all] command.
Total Time Saved (ms) Total time saved in milliseconds. Incremented on client
side WAE by 1 RTT whenever an idle fast connection is
reused instead of establishing a new WAN connection.
Current Active Connections Free for Fast
Connection Use
Number of Current Active Connections that are idle and
available for reuse as a fast connection. Incremented
when an in-use active connection becomes idle and is
available for reuse as a fast connection.
Decremented when an available idle active connection is
reused or its idle timeout (5 secs) is reached. Not cleared
using the clear statistics accelerator [http | all]
command.
Table 3-77 Field Descriptions for the show statistics accelerator http detail Command
Field Description