Specifications

3-263
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Table 3-77 describes the fields shown in the show statistics accelerator http detail command display.
Drops Number of hits that attempted use of the accelerator application
but were rejected for some reason. A separate hit and drop will
be tallied for each TCP SYN packet received for a connection.
This includes the original SYN and any retries.
Rejected Connection Counts Due To:
(Total:)
• The number of all of the reject reasons that represent hits
that were not able to use the accelerator applications.
Reject reasons include the following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the time window)
• Minimum TFO not available
• Resource manager (minimum resources not available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Table 3-76 Field Descriptions for the show statistics accelerator generic Command (continued)
Field Description
Table 3-77 Field Descriptions for the show statistics accelerator http detail Command
Field Description
Time Accelerator was started Local time accelerator was started or restarted.
Time Statistics were Last Reset/Cleared Local time accelerator was last started or restarted, or the
clear statistics accelerator [http | all] command was
executed since accelerator was last started or restarted.