Specifications

3-262
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Total number of connections handled Connections handled since the accelerator was started or its
statistics last reset. Incremented when a connection is accepted
or reused. Never decremented.
This value will always be greater than or equal to the Current
Active Connections statistic. Includes all connections accepted
by the accelerator even if later pushed down to generic
optimization, dropped, or handed-off to another accelerator.
Total Handled Connections = Total Optimized Connections +
Total Pushed Down Connections + Total Dropped Connections.
Total number of active connections Total number of hits that represent either active connections
using the accelerator application.
Total number of bytes transferred
from client
Total number of bytes transferred from the client side.
Total number of bytes transferred
from server
Total number of bytes transferred from the server side.
Policy Engine Statistics
Session timeouts The number of times the accelerator application did not issue a
keepalive to the Policy Engine in a timely manner. A session
refers to the particular registration of the accelerator
application within the Policy Engine.
Total timeouts The total number of times the accelerator application did not
issue a keepalive to the Policy Engine in a timely manner. This
may encompass multiple registrations.
Last keepalive received The amount of time since the last keepalive (seconds).
Last registration occurred The amount of time since the accelerator application registered
with the Policy Engine (seconds). Most likely causes are:
• WAE was rebooted
• Configuration change with the accelerator application
enabled
• Restart of the accelerator application by the Node Manager
Hits Number of connections that had a configured policy that
specified the use of the accelerator application.
Updated Released Number of hits that were released during Auto-Discovery and
did not make use of the accelerator application.
Active Connections Number of hits that represent either active connections using
the accelerator application or connections that are still in the
process of performing Auto-Discovery.
Completed Connections Number of hits that have made use of the accelerator
application and have completed.
Table 3-76 Field Descriptions for the show statistics accelerator generic Command (continued)
Field Description