Specifications

3-260
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Table 3-75 describes the fields shown in the show statistics accelerator epm detail command display.
Table 3-76 describes the fields shown in the show statistics accelerator generic connections detail
command display. This command shows the aggregated statistics for all connections.
Accept queue add failures Number of connections that could not be added to the
accelerator connection accept queue due to a failure. The
failure could possibly be due to the accelerator not being
present, or a queue overflow.
AO discovery successful For the accelerators that work in dual-ended mode, accelerator
discovery (as part of auto discovery) is performed. This counter
indicates the number of times accelerator discovery was
successful.
AO discovery failure The number of times accelerator discovery failed. Possible
reasons include the accelerator not being enabled or running on
the peer WAE, or the license not configured for the accelerator.
Table 3-74 Field Descriptions for the show statistics accelerator cifs Command (continued)
Field Description
Table 3-75 Field Descriptions for the show statistics accelerator epm Command
Field Description
Global TCP AO connection statistics
Time Accelerator was started Time that the accelerator was started.
Time Statistics were Last
Reset/Cleared
Time that the statistics were last reset or cleared.
Total Handled Connections Total connections handled.
Total Optimized Connections Total optimized connections.
Total Pushed Down Connections Total pushed down connections.
Total Dropped Connections Total dropped connections.
Current Active Connections Current active connections.
Current Pending Connections Current pending connections.
Maximum Active Connections Maximum active connections.
Total Requests Total requests.
Total Requests Successfully Parsed Total requests successfully parsed.
Total Request Errors Total request errors.
Total Responses Total responses.
Total Responses Successfully Parsed Total responses successfully parsed.
Total Service-unavailable Responses Total service-unavailable responses.
Total Requests for UUID not in
Policy Engine Map
Total requests for UUID not in policy engine map.
Total Response Errors Total response errors.