Specifications
3-259
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show statistics accelerator
Last registration occurred Amount of time since the accelerator application registered
with the Policy Engine (seconds). Most likely causes are:
• WAE was rebooted
• Configuration change with the accelerator application
enabled
• Restart of the accelerator application by the Node Manager
Hits Number of connections that had a configured policy that
specified the use of the accelerator application.
Updated Released Number of hits that were released during auto-discovery and
did not make use of the accelerator application.
Active Connections Number of hits that represent either active connections using
the accelerator application or connections that are still in the
process of performing auto-discovery.
Completed Connections Number of hits that have made use of the accelerator
application and have completed.
Drops Number of hits that attempted use of the accelerator application
but were rejected for some reason. A separate hit and drop will
be tallied for each TCP SYN packet received for a connection.
This includes the original SYN and any retries.
Rejected Connection Counts Due To:
(Total:)
• Number of all of the reject reasons that represent hits that
were not able to use the accelerator applications. Reject
reasons include the following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the time window)
• Minimum TFO not available
• Resource manager (minimum resources not available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for accept Number of connections added to the accelerator connection
accept queue by auto discovery.
Table 3-74 Field Descriptions for the show statistics accelerator cifs Command (continued)
Field Description