Specifications

3-251
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show snmp
Table 3-70 describes the fields shown in the show snmp group command display.
Table 3-71 describes the fields shown in the show snmp stats command display.
Cmp: Comparison. Type of boolean comparison to perform. The
numbers 1–6 correspond to these Boolean comparisons:
unequal (1)
equal (2)
less (3)
lessOrEqual (4)
greater (5)
greaterOrEqual (6)
Start: Starting value for which this instance will be triggered.
ObjOwn: Object owner.
Obj: Object.
EveOwn: Event owner.
Eve: Event. Type of SNMP event. For example: CLI_EVENT.
Delta Value Table: Table containing trigger information for delta sampling.
(0):
Thresh: Threshold value to check against if the trigger type is threshold.
Exis: Type of existence test to perform. Values are 1 or 0.
Read: Indicates whether the MIB instance has been queried or not.
OID: Object ID (Same as MIB instance).
val: Value ID.
(2): MIB instance on which the trigger is configured. This is the
second management trigger listed in the show output. The
fields are repeated for each instance listed in this show
command.
Table 3-69 Field Descriptions for the show snmp event Command (continued)
Field Description
Table 3-70 Field Descriptions for the show snmp group Command
Field Description
groupname Name of the SNMP group, or collection of users who have a
common access policy.
security_model Security model used by the group (either v1, v2c, or v3).
readview String identifying the read view of the group.
writeview String identifying the write view of the group.
notifyview string identifying the notify view of the group.