Specifications

3-249
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show snmp
Table 3-66 summarizes the mapping of module names to module IDs.
Table 3-67 summarizes the mapping of category names to category IDs.
Table 3-68 describes the fields shown in the show snmp engineID command display.
Table 3-69 describes the fields shown in the show snmp event command display. The show snmp event
command displays information about the SNMP events that were set using the snmp trigger command:
Table 3-66 Summary of Module Names to ID Numbers
Module Name Module ID
AD_DATABASE 8000
NHM 1
NHM/NHM 2500
nodemgr 2000
standby 4000
sysmon 1000
UNICAST_DATA_RECEIVER 5000
UNICAST_DATA_SENDER 6000
Table 3-67 Summary of Category Names to ID Numbers
Category Name Category ID
Communications 1
Service Quality 2
Processing Error 3
Equipment 4
Environment 5
Content 6
Table 3-68 Field Descriptions for the show snmp engineID
Field Description
Local SNMP Engine ID String that identifies the copy of SNMP on the local device.
Table 3-69 Field Descriptions for the show snmp event Command
Field Description
Mgmt Triggers Output for management triggers, which are numbered 1, 2, 3,
and so on in the output.
(1): Owner: Name of the person who configured the trigger. “CLI” is the
default owner; the system has a default trigger configured.