Specifications

1-10
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 1 Using the WAAS Command-Line Interface
Using Command Modes
interface configuration From global configuration
mode, use the interface
command.
WAE(config-if)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
standard ACL
configuration
From global configuration
mode, use the ip
access-list standard
command.
WAE(config-std-nacl)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
extended ACL
configuration
From global configuration
mode, use the ip
access-list extended
command.
WAE(config-ext-nacl)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
preposition
configuration
From global configuration
mode, use the accelerator
cifs preposition command.
WAE(config-preposition)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
virtual blade
configuration
From global configuration
mode, use the
virtual-blade command.
WAE(config-vb)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
PKI certificate
authority
configuration
From global configuration
mode, use the crypto pki
ca command.
WAE(config-ca)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
PKI global settings
configuration
From global configuration
mode, use the crypto pki
global-settings command.
WAE(config-pki-global-se
ttings)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
SSL accelerated
service configuration
From global configuration
mode, use the crypto ssl
service
accelerated-service
command.
WAE(config-ssl-accelerat
ed)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
SSL cipher list
configuration
From global configuration
mode, use the crypto ssl
cipher-list command.
WAE(config-cipher-list)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
SSL global service
configuration
From global configuration
mode, use the crypto ssl
services global-settings
command.
WAE(config-ssl-global)#
To return to global configuration mode,
use the exit command.
To return to privileged EXEC mode, use
the end command or press Ctrl-Z.
Table 1-1 WAAS Command Modes Summary (continued)
Command Mode Access Method Prompt Exit Method