Specifications

3-237
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show print-services
show print-services
To display administrative users who have access to configuration privileges, legacy print services, or
legacy print service processes on a WAAS device, use the show print-services EXEC command.
show print-services {drivers user username | process}
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Legacy print services are deprecated and no longer supported in WAAS 4.2.x and later. We recommend
using the Windows print accelerator (see the (config) accelerator windows-print command).
Examples Table 3-62 describes the fields shown in the show print-services process command display.
drivers Displays printer drivers on this print server.
user username Specifies a username that belongs to the print admin group.
process Displays information about the print server and print spooler.
Table 3-62 Field Descriptions for the show print-services process Command
Field Description
Print server is running. Operation status of the print server.
Print spooler is running. Operation status of the print spooler.
Print Server Status
Samba version 3.0.20 Samba version being used.
PID Process ID. Process identification number of the Samba process
on the WAE Linux appliance.
Username UNIX user that has started the Samba process.
Group UNIX group to which the user belongs.
Machine Machine name and IP address. The machine name is the same
as the NetBIOS name.
Service Remote procedure call (RPC) port that is used by clients to
connect to the print server. Value is always IPC$.