Manualshelf

Specifications

ManualsBrandsCisco ManualsComputer equipmentWAE-7326-K9
21222324252627282930
1-8
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 1 Using the WAAS Command-Line Interface
Using Command Modes
To enter this mode, use the crypto pki ca command from the global configuration mode.
To exit PKI certificate authority configuration mode, use the exit command to return to global
configuration mode:
WAE(config-ca)# exit
WAE(config)#
Using PKI Global Settings Configuration Mode
Use PKI global settings configuration mode to configure OCSP and revocation checking.
To enter this mode, use the crypto pki global-settings command from the global configuration mode.
To exit PKI global settings configuration mode, use the exit command to return to global configuration
mode:
WAE(config-pki-global-settings)# exit
WAE(config)#
Using SSL Accelerated Service Configuration Mode
Use SSL accelerated service configuration mode to enable and configure SSL acceleration on your
WAAS system, and define services to be accelerated on the SSL path.
To enter this mode, use the crypto ssl service accelerated-service command from the global
configuration mode.
To exit SSL accelerated service configuration mode, use the exit command to return to global
configuration mode:
WAE(config-ssl-accelerated)# exit
WAE(config)#
Using SSL Cipher List Configuration Mode
Use SSL cipher list configuration mode to configure secure socket layer (SSL) encryption cipher lists
on a WAAS device.
To enter this mode, use the crypto ssl cipher-list command from the global configuration mode.
To exit SSL cipher list configuration mode, use the exit command to return to global configuration mode:
WAE(config-cipher-list)# exit
WAE(config)#
Using SSL Global Service Configuration Mode
Use SSL global service configuration mode to enable and configure basic SSL acceleration settings on
your WAAS system.
To enter this mode, use the crypto ssl services global-settings command from the global configuration
mode.
To exit SSL global service configuration mode, use the exit command to return to global configuration
mode:
WAE(config-ssl-global)# exit