Specifications

3-217
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show interface
Table 3-49 describes the fields shown in the show interface standby command display.
Related Commands (config) interface GigabitEthernet
show running-config
show startup-config
Table 3-49 Field Descriptions for the show interface standby Command
Field Description
Description Description of the device, as configured by using the
description option of the interface global configuration
command.
Interface Standby 1 Number that identifies the standby group and the number of
associated physical interfaces.
Member interfaces Member interfaces of the standby group. Shows which physical
interfaces are part of the standby group. Shows the interface
definition, such as GigibitEthernet 1/0, and indicates if the
interface is active (has an active layer 2 connection to a switch),
primary (configured as primary in the running configuration),
and in use (carrying network traffic).
Type Type of interface. Always Ethernet.
. . . The following fields are the same as for a gigabit Ethernet
interface, as shown in Table 3-46.