Specifications

3-210
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show hardware
Related Commands show disks
show version
Mount point Mount point for the file system. For example the mount point
for SYSFS is /local/local1.
Type Type of the file system. Values include root, internal,
CONTENT, SYSFS, and PRINTSPOOL.
Device Path to the partition on the disk.
Size Total size of the file system in megabytes.
Inuse Amount of disk space being used by the file system.
Free Amount of unused disk space for the file system.
Use% Percentage of the total available disk space being used by the
file system.
Software RAID devices If present, lists the software RAID devices and provides the
following information for each:
Device name Path to the partition on the disk. The partition name “md1”
indicates that the partition is a raided partition and that the
RAID type is RAID-1. (RAID-1 is the only RAID type
supported in WAAS.)
Type Type of RAID, for example RAID-1.
Status Operational status of the RAID device. Status may contain
NORMAL OPERATION or REBUILDING.
Physical devices and status Disk number and operational status of the disk, such as
[GOOD] or [BAD].
Table 3-43 Field Descriptions for the show hardware Command (continued)
Field Description