Specifications

3-208
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show hardware
show hardware
To display system hardware status for a WAAS device, use the show hardware EXEC command.
show hardware
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines The show hardware command lists the system hardware status, including the version number, the
startup date and time, the run time since startup, the microprocessor type and speed, the amount of
physical memory available, and a list of disk drives.
Examples Table 3-43 describes the fields shown in the show hardware command display.
Table 3-43 Field Descriptions for the show hardware Command
Field Description
Cisco Wide Area Application
Services Software (WAAS)
Copyright (c) year by Cisco Systems,
Inc.
Cisco Wide Area Application
Services Software Release XXX
(build bXXX month day year)
Software application, copyright, release, and build information.
Version Version number of the software that is running on the device.
Compiled hour:minute:second month
day year by cnbuild
Compile information for the software build.
Device Id The device ID.
System was restarted on day of week
month day hour:minute:second year
Date and time that the system was last restarted.
The system has been up for X hours,
X minutes, X seconds
Length of time the system has been running since the last
reboot.
CPU 0 is CPU manufacturer information.