Specifications

3-204
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show egress-methods
show egress-methods
To view the egress method that is configured and that is being used on a particular WAE, use the show
egress-methods EXEC command.
show egress-methods
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Examples Table 3-41 describes the fields shown in the show egress-methods command display.
Related Commands show tfo tcp
(config) egress-method
Table 3-41 Field Descriptions for the show egress-methods Command
Field Description
Intercept method Intercept method used by router to send packets to the WAE.
TCP Promiscuous 61 or 62 WCCP service number.
WCCP negotiated return
method
WCCP return method being used by the router. Values include
WCCP_GRE, WCCP_L2, NEG_RTN_PENDING
(negotiation is
pending), and UNKNOWN.
Destination This value is not configurable. The value of this field is always ANY.
Egress Method Configured Egress method configured in the CLI.
Egress Method Used Egress method being used.