Specifications

3-183
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show cifs
CIFS legacy mode is deprecated and no longer supported in WAAS 4.2.x and later. We recommend using
the transparent CIFS accelerator instead.
Use the show cifs cache command to view information about caching efficiency. You might use this
command to determine if the cache contains sufficient space or if more space is needed. If you have a
performance issue, you might use this command to see whether or not the cache is full.
Use the show cifs connectivity peers command to validate the WAN link state and the Edge to Core
connectivity. This command is useful for general monitoring and debugging.
Use the show cifs requests count or show cifs requests waiting command to monitor the load for CIFS
traffic. You might also use this command for debugging purposes to isolate requests that are not
processing.
Use the show cifs sessions count or show cifs sessions list command to view session information. You
might use this command to monitor connected users during peak and off-peak hours.
Examples The following is sample output from the show cifs connectivity peers command:
WAE# show cifs connectivity peers
In_533202151_2.43.60.38
Related Commands cifs