Specifications

3-182
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show cifs
show cifs
To display legacy CIFS run-time information, use the show cifs EXEC command.
show cifs auto-discovery [enabled | host-db | last]
show cifs cache {disk-use | entry-count}
show cifs connectivity peers
show cifs mss
show cifs requests {count | waiting}
show cifs sessions {count | list}
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines The show cifs command operates on legacy mode WAFS. For information on the transparent CIFS
accelerator, use the show accelerator or show statistics accelerator commands.
auto-discovery Displays the CIFS auto-discovery status and run-time data.
enabled (Optional) Displays current state of CIFS auto-discovery.
host-db (Optional) Displays currently known hosts.
last (Optional) Displays last auto-discovered entries.
cache Displays CIFS cache information.
disk-use Displays the total disk usage for CIFS cache.
entry-count Displays the count of internal cache resources used for cached files.
connectivity Displays Run-time information on Edge-Core connectivity.
peers Displays a list of connected Cores.
mss Displays the TCP maximum segment size (MSS) for the CIFS adapter. The
segment size range is 512–1460.
requests Displays run-time information on active CIFS requests.
count Displays the number of pending CIFS requests.
waiting Displays the number of waiting CIFS requests.
sessions Displays run-time information on active CIFS sessions.
count Displays the connected session count.
list Displays the list of connected CIFS sessions.