Specifications

3-178

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

show cdp

Table 3-17 describes the fields shown in the show cdp entry neighbor version command display.

Table 3-18 describes the field in the show cdp holdtime command display.

Table 3-19 describes the fields shown in the show cdp interface command display.

Table 3-16 Field Descriptions for the show cdp entry protocol Command

Field Description

Protocol information

for XX

Name or identifier of the neighbor device.

IP address IP address of the neighbor device.

CLNS address Non-IP network address. The field depends on the type of neighbor.

DECnet address Non-IP network address. The field depends on the type of neighbor.

Table 3-17 Field Descriptions for the show cdp entry version Command

Field Description

Version information

for XX

Name or identifier of the neighbor device.

Software, Version Software and version running on the neighbor device.

Table 3-18 Field Descriptions for the show cdp holdtime Command

Field Description

XX seconds Time, in seconds, that the current device will hold the CDP advertisement

from a transmitting router before discarding it.

Table 3-19 Field Descriptions for the show cdp interface Command

Field Description

Interface_slot/port is

Operation status of the CDP interface. Values are up or down.

Encapsulation Encapsulation.

Sending CDP packets

every XX seconds

Time interval at which CDP packets are sent.

Holdtime Time, in seconds, that the current device will hold the CDP advertisement

from a transmitting router before discarding it.

CDP protocol is XX Protocol being used by the connectivity media.