Specifications

3-176
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show cdp
show cdp
To display CDP configuration information, use the show cdp EXEC command.
show cdp entry {* | neighbor} [protocol | version]
show cdp interface
[GigabitEthernet slot/port | InlinePort slot/port/{lan/wan}]
show cdp neighbors
[detail | GigabitEthernet slot/port [detail] | InlinePort slot/port/{lan/wan}[detail]]
show cdp {holdtime | run | timer | traffic}
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines The show cdp command displays information about how frequently CDP packets are resent to
neighbors, the length of time that CDP packets are held by neighbors, the disabled status of CDP
Version 2 multicast advertisements, CDP Ethernet interface ports, and general CDP traffic information.
entry (Optional) Displays information for a specific CDP neighbor entry.
* Specifies all neighbors.
neighbor The CDP neighbor entry to display.
protocol (Optional) Displays the CDP protocol information.
version (Optional) Displays the CDP version.
interface Displays interface status and configuration.
GigabitEthernet
slot/port
(Optional) Displays Gigabit Ethernet configuration (slot 1–2 and port
number).
InlinePort
slot/port/{lan/wan}
(Optional) Displays Inline Port configuration (slot 1–4, port number, LAN
or WAN port).
neighbors Displays CDP neighbor entries.
detail (Optional) Displays detailed information.
holdtime Displays the length of time that CDP information is held by neighbors.
run Displays the CDP process status.
timer Displays the time when CDP information is resent to neighbors.
traffic Displays CDP statistical information.