Specifications

3-166
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
show alarms
Related Commands (config) alarm overload-detect
(config) snmp-server enable traps
Table 3-5 Field Descriptions for the show alarms status Command
Field Description
Critical Alarms Number of critical alarms.
Major Alarms Number of major alarms.
Minor Alarms Number of minor alarms.
Overall Alarm Status Aggregate status of alarms.
Device is NOT in alarm overload
state.
Status of the device alarm overload state.
Device enters alarm overload state
@ 999 alarms/sec.
Threshold number of alarms per second at which the device
enters the alarm overload state.
Device exits alarm overload state @
99 alarms/sec.
Threshold number of alarms per second at which the device
exits the alarm overload state.
Overload detection is ENABLED. Status of whether overload detection is enabled on the device.