Specifications

3-130
Cisco Wide Area Application Services Command Reference
OL-21611-01
Chapter 3 CLI Commands
enable
enable
To access privileged EXEC commands, use the enable EXEC command.
enable
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use the WAAS software CLI EXEC mode for setting, viewing, and testing system operations. This
command mode is divided into two access levels: user and privileged. To access privileged-level EXEC
mode, enter the enable EXEC command at the user access level prompt and specify a privileged EXEC
password (superuser or admin-equivalent password) when prompted for a password.
If using TACACS+ authentication, there is an enable password feature in TACACS+ that allows an
administrator to define a different enable password for each user. If a TACACS+ user enters the enable
EXEC command to access privileged EXEC mode, that user must enter the enable password defined by
the TACACS+ server.
The disable command takes you from privileged EXEC mode to user EXEC mode.
Examples The following example shows how to access privileged EXEC mode:
WAE> enable
WAE#
Related Commands disable
exit