Specifications

3-113

Cisco Wide Area Application Services Command Reference

OL-21611-01

Chapter 3 CLI Commands

debug tfo

To monitor and record TFO flow optimization debugging, use the debug tfo EXEC command. To disable

debugging, use the undebug form of this command.

debug tfo {buffer-mgr | connection [auto-discovery | comp-mgr [acl] | conn-mgr [acl] |

egress-method [acl] | filtering [acl] | netio-engine [acl] | policy-engine [acl] |

synq [acl] | acl] | stat-mgr | translog}

undebug tfo {buffer-mgr | connection [auto-discovery [acl] | comp-mgr [acl] | conn-mgr [acl] |

| stat-mgr | translog}

Syntax Description

Defaults No default behavior or values.

Command Modes EXEC

Device Modes application-accelerator

Usage Guidelines Because the performance of the WAAS device degrades when you use the debug command, we

recommend that you use this command only at the direction of Cisco TAC. For more information, see

the “Obtaining Documentation and Submitting a Service Request” section on page xx.

If the watchdog utility is not running, the message “WAAS is not running” appears.

Use the show debugging command to display enabled debug options.

buffer-mgr Enables TFO flow optimization debugging.

connection Enables TFO connection debugging.

auto-discovery (Optional) Enables TFO connection debugging for the

auto-discovery module.

acl (Optional) ACL to limit TFO connections.

comp-mgr Enables TFO connection debugging for the compression module.

conn-mgr Enables TFO connection debugging for the connection manager.

egress-method Enables TFO connection debugging for the connection egress

method.

filtering Enables TFO connection debugging for the filtering module.

netio-engine Enables TFO connection debugging for the network input/output

module.

policy-engine Enables TFO connection debugging of application policies.

synq Enables TFO connection debugging for the SynQ module.

stat-mgr Enables TFO statistics manager debugging.

translog Enables TFO transaction log debugging.